Further experiences with the series 1 hybrid computer leads me to believe that in most cases the damage to the battery results from a computer fault. One or more diode in the computer fails resulting in incorrect of the battery computer. This is when you get the triangle error.
The problem with this situation is that unless the battery is fully functional it is impossible to diagnose a computer fault. The diagnostic scanner will return a battery fault even if it is the computer that is faulty. This is because the computer scans and senses the battery voltages and if 1 diode is faulty it gives the scanner a faulty battery error.
We sent faulty computer to a company for repair and upon installation all errors including the triangle error disappears. There was no need to reset error codes with the diagnostic scanner.
More update on this blogg soon as I investigate the problem further.
Friday, July 10, 2009
Tuesday, June 30, 2009
Repairing the battery computer
The good news is that the battery computer can be repaired. We reconditioned a hybrid battery for Auto Electrical Solutions Ltd in Palmerston North It had a faulty computer. The tortoise would come on when the battery indicator showed half or 3/4 charge. This is a sure indicator that one of the diode sensors is faulty.
Because the battery is now fixed, it is now possible to check the diodes in the computer and change the faulty ones. This is what AES did and all error codes also went away.
This is good news as it completes the process of repairing and reconditioning the series 1 hybrid battery.
Because the battery is now fixed, it is now possible to check the diodes in the computer and change the faulty ones. This is what AES did and all error codes also went away.
This is good news as it completes the process of repairing and reconditioning the series 1 hybrid battery.
Wednesday, June 10, 2009
How to tell if your prius battery computer is faulty
The prius series 1 battery computer has 40 diodes and capacitors in an array. If one of these diode or capicators fail the computer is faulty.
If you see the tortoise icon when the battery charge level is in the green, your battery computer is faulty. You will have to get another computer. Driving with this computer will overcharge the battery and destroy it completely. I mean completely that is most of the cells will be destroyed until you can't drive it at all.
You can't even replace the battery with a new one!!! The computer have to be replaced.
It may be possible to carefully drive the vehicle but you must not let the overcharge 100% charge indicator show for too long and you must back off when you see the yellow charge indicator. It is difficult to drive within these parameters.
If you see the tortoise icon when the battery charge level is in the green, your battery computer is faulty. You will have to get another computer. Driving with this computer will overcharge the battery and destroy it completely. I mean completely that is most of the cells will be destroyed until you can't drive it at all.
You can't even replace the battery with a new one!!! The computer have to be replaced.
It may be possible to carefully drive the vehicle but you must not let the overcharge 100% charge indicator show for too long and you must back off when you see the yellow charge indicator. It is difficult to drive within these parameters.
Tuesday, June 2, 2009
How to recondition your prius hybrid battery - Series 1
This post is to help those who wants to recondition their Series 1 Prius battery themselves. Do note that the series 1 Prius ( 1997 - 2000 ) refers to the model that uses the Nimh D cells. These were never imported into the United States. Those in the US will refer to the Series 2 ( 2000 - 2003 ) using the parametric Nimh cell module as the Series 1. ( Confused ? )
The first step is to remove the battery pack from the vehicle. You can refer to our website for more detail information. HERE
When we first started reconditioning this battery in 2007 we did what most people would do that is to check the condition of each tube with a volt meter and replace the weakest tubes with better ones. This process though logical is extremely frustrating. The problem is that each tube consist of 6 D cells in series and measuring the voltage of the whole tube does not accurately reflect on the condition of the tube. To more accurately check this remove the plastic wrapper and test the voltage of each D cell separately.
Whenever you try to determine the status of a cell by it's voltage you have to know the state of charge before you start your measurement. Using a suitable Nimh charger give the tube a full charge before you start your measurement.
To accurately determine the capacity of each tube discharge the tube with a know resistor and measure the amps used. If you get 5 amps and above the tube will be suitable for use in the pack.
When you get all 40 tubes, assemble the battery pack and with luck you have reconditioned your own battery pack successfully and your car will be roaring back to life again.
Caution : The Series 1 Prius battery pack consist of 240 Nimh D cells in series. Up to 360 volts could be exposed. Wear protective gloves when working with this battery at all times.
The first step is to remove the battery pack from the vehicle. You can refer to our website for more detail information. HERE
When we first started reconditioning this battery in 2007 we did what most people would do that is to check the condition of each tube with a volt meter and replace the weakest tubes with better ones. This process though logical is extremely frustrating. The problem is that each tube consist of 6 D cells in series and measuring the voltage of the whole tube does not accurately reflect on the condition of the tube. To more accurately check this remove the plastic wrapper and test the voltage of each D cell separately.
Whenever you try to determine the status of a cell by it's voltage you have to know the state of charge before you start your measurement. Using a suitable Nimh charger give the tube a full charge before you start your measurement.
To accurately determine the capacity of each tube discharge the tube with a know resistor and measure the amps used. If you get 5 amps and above the tube will be suitable for use in the pack.
When you get all 40 tubes, assemble the battery pack and with luck you have reconditioned your own battery pack successfully and your car will be roaring back to life again.
Saturday, May 9, 2009
Charging Nimh Battery with the inverter
The series 1 Prius hybrid has an inbuilt inverter that can be used to charge the main nimh battery with a 12 volt battery. This feature was dropped in lter models.
How to charge the nimh battery with the inverter.
1) Connect a 75 ah or larger battery in place of the 12 volt battery. The standard 12 volt battery does noy have enough capacity.
2) Start the vehicle. The nimh 288 volt fault indicator will display.
3) Remove the ignition key
4) Press start on the inverter in the car boot.
5) Charging will start
6) Allow charging to complete
7) Start the vehicle.
8) Let it run to charge the battery completely
9) Reconnect the 12 volt battery
How to charge the nimh battery with the inverter.
1) Connect a 75 ah or larger battery in place of the 12 volt battery. The standard 12 volt battery does noy have enough capacity.
2) Start the vehicle. The nimh 288 volt fault indicator will display.
3) Remove the ignition key
4) Press start on the inverter in the car boot.
5) Charging will start
6) Allow charging to complete
7) Start the vehicle.
8) Let it run to charge the battery completely
9) Reconnect the 12 volt battery
Friday, May 1, 2009
Battery Computer Failure in Series 1 Prius
First indication was when we get a vehicle where the charge monitor went from yellow to half to 3/3 then to full very quickly. It then discharge quickly to yellow with the tortoise low power indicator showing. This quick flickering in charge level is not usual. We always suspected the Nimh battery.
Our recondition process now results in a good working battery - we therefore suspected the computer. Replacing the faulty computer with another fixed the problem. Out of more than 50 batteries reconditioned to date we have encountered about 5.
We think that this could be the result of diode degradation over time. If this is so then all battery computer will have a limited life!! Perhaps someone can shed more light on this.
Our recondition process now results in a good working battery - we therefore suspected the computer. Replacing the faulty computer with another fixed the problem. Out of more than 50 batteries reconditioned to date we have encountered about 5.
We think that this could be the result of diode degradation over time. If this is so then all battery computer will have a limited life!! Perhaps someone can shed more light on this.
Saturday, April 11, 2009
Toyota Scan Tool
This message from Kevin in the Yahoo Mk1 Prius Forum
I own a Prius Mk1 and have done a considerable amount of
research on the scanning of this car. Despite the fact that it has a
> > > standard 16 pin OBD connector, it is one of the first few cars to use
> > > the 16 pin connector BEFORE it was adopted as any sort of standard.
> > > The standard of "OBD-11" only applied as compulsory in the USA from
> > > 1995 anyway, and car manufacturers only had to comply with OBD-11 if
> > > they wished to sell there cars in the USA from 1995. Toyota did not
> > > wish to sell their Prius Mk1 outside of Japan and the 1995 OBD-11
> > > protocols around at the time did not suit their needs, as they were
> > > inadequate for this car. I can reveal that the car is using "Toyota M-
> > > OBD", Toyota multiplex onboard diagnostics acording to people who
> > > specalise in toyota OBD.
> > >
> > > In the 16 pin connector (correctly known as the J1962 socket) the
> > > pins are as follows :-
> > > pin 16 = battery
> > > pin 4 = ground
> > > pin 13= test pin
> > > pins 6,7,9,14 are communication pins
> > >
> > > the Prius Mk1 uses a ECU for each of ,the engine, the ABS, the
> > > airbag, the Hybrid running gear and finally the Hybrid battery.
> > >
> > > Toyota themselves use a "Techmaster scantool" with an "S2000"
> > > cartridge adaptor, with software that they wrote themselves just for
> > > this car, only available to Toyota maindealers in Japan. The software
> > > itself uses "keyword protocols", (that's code words to you and me),
> > > using ALDL speeds of communication ( Assembly Line Diagnostic Link),
> > > now known communally as OBD-1 speeds of communication, first used
> > > commonally by General motors in the mid 1980's.
> > >
> > > The problem with getting a scan tool to handle the prius Mk1 is, that
> > > the scan tool needs to handle "Toyota M-OBD" keyword protacols, It
> > > also deeds to have a "J1962 connector" with the correct pin
> > > configuration. .
> > >
> > > All OBD-1 and OBD-11 dedicatated scantools will not work on this
> > > car !!!!!!
> > > I know, I have tried several of them that are on the market. Some of
> > > them costing several thousand of pounds.
> > > There are some of the more expensive ones that do the Prius MK11(
> > > which is OBD-11 compliant using more common keyword protocols) and
> > > Prius Mk111&1V using OBD-11 "CAN" (continuose area network protocols).
> > >
> > > So "what's to do then"?
> > >
> > > The only "After market" scan tools that are known to read the OBD's
> > > of the Prius Mk1 cars are the "Carman" scan tools range made by
> > > Nextech. The Carman A200( now discontinued) , the carman scan lite and
> > > the Carman VG. The scantools also have to have the september 2007
> > > software update to get the best results as well. The carman scan lite
> > > is £1500 ($3000) retail.
> > >
> > > I own a Carman scan lite, and the scan tool Is "brilliant", as it
> > > leaves no stone unturned, you can get all the information from the
> > > car that you need on any aspect.
> > >
> > > All 20 of Prs of modules in the Hybrid battery are shown including
> > > voltages, Ohms, temp of each Pr. Also the overall max and min
> > > voltages and temperatures of the monitoring system and exact % of
> > > overall charge as well as information on every sensor on the whole
> > > car.
> > > it will give you all the trouble codes on each of the ECU's and
> > > enable you to reset them as well.
> > >
> > > The only down side to the Carman scan tools are that they do not "
> > > flash" the ECU's, that is to say that, as of yet, the software dose
> > > not turn the " balance charge request" from "OFF" to "ON" and back
> > > again, even though you can see it on the scan.
> > >
> > > One of the problems with these cars is that the cells in the Hybrid
> > > battery are an early type of "high capacity" NM-Hi, and over time
> > > they may suffer from the " battery memory affect", problem similar
> > > to NI-CAD cells, and they discharge more rapidly if left unused for
> > > any length of time as well. Toyota thought to overcome this problem
> > > by using their scantool to do the "balance charge request"
> > > manouver ,by using the cars own charging system,( a full
> > > overall/across the board 110% charge) to rejuvenate the whole Battery
> > > in one go, if this failed they would fit a free RE-CON battery
> > > instead, all though this was rare. So sadly, we "outside of Japan"
> > > owners can only strip the Hybrid Battery down ( be careful they are
> > > 315 DC volts when fully charged, from first to last terminal,
> > > according to my carman scantool info, electricians tools and gloves
> > > required). You then have to rejuvenate each module, one at a time,
> > > replacing any failed ones, and finally rebuild the battery again
> > > using as evenly as balanced pairs as you can. The Carman scan lite
> > > can help you monitor this Process but " If only" it cannot do the
> > > balance charge manouver as of yet as I have said. Some cars go on and
> > > on, without problems ( 100,000 miles +) with the battery, some have
> > > stripped the battery down and replaced a " too good" a module, to
> > > achieve a balance. So until hopefully, Carman sortout a "balance
> > > charge manouver" setting on thier scan tool, in one of their future
> > > software updates, we will still have to do this by hand. Other wise
> > > the carman scan tools covers everything else and is unique.
> > >
I own a Prius Mk1 and have done a considerable amount of
research on the scanning of this car. Despite the fact that it has a
> > > standard 16 pin OBD connector, it is one of the first few cars to use
> > > the 16 pin connector BEFORE it was adopted as any sort of standard.
> > > The standard of "OBD-11" only applied as compulsory in the USA from
> > > 1995 anyway, and car manufacturers only had to comply with OBD-11 if
> > > they wished to sell there cars in the USA from 1995. Toyota did not
> > > wish to sell their Prius Mk1 outside of Japan and the 1995 OBD-11
> > > protocols around at the time did not suit their needs, as they were
> > > inadequate for this car. I can reveal that the car is using "Toyota M-
> > > OBD", Toyota multiplex onboard diagnostics acording to people who
> > > specalise in toyota OBD.
> > >
> > > In the 16 pin connector (correctly known as the J1962 socket) the
> > > pins are as follows :-
> > > pin 16 = battery
> > > pin 4 = ground
> > > pin 13= test pin
> > > pins 6,7,9,14 are communication pins
> > >
> > > the Prius Mk1 uses a ECU for each of ,the engine, the ABS, the
> > > airbag, the Hybrid running gear and finally the Hybrid battery.
> > >
> > > Toyota themselves use a "Techmaster scantool" with an "S2000"
> > > cartridge adaptor, with software that they wrote themselves just for
> > > this car, only available to Toyota maindealers in Japan. The software
> > > itself uses "keyword protocols", (that's code words to you and me),
> > > using ALDL speeds of communication ( Assembly Line Diagnostic Link),
> > > now known communally as OBD-1 speeds of communication, first used
> > > commonally by General motors in the mid 1980's.
> > >
> > > The problem with getting a scan tool to handle the prius Mk1 is, that
> > > the scan tool needs to handle "Toyota M-OBD" keyword protacols, It
> > > also deeds to have a "J1962 connector" with the correct pin
> > > configuration. .
> > >
> > > All OBD-1 and OBD-11 dedicatated scantools will not work on this
> > > car !!!!!!
> > > I know, I have tried several of them that are on the market. Some of
> > > them costing several thousand of pounds.
> > > There are some of the more expensive ones that do the Prius MK11(
> > > which is OBD-11 compliant using more common keyword protocols) and
> > > Prius Mk111&1V using OBD-11 "CAN" (continuose area network protocols).
> > >
> > > So "what's to do then"?
> > >
> > > The only "After market" scan tools that are known to read the OBD's
> > > of the Prius Mk1 cars are the "Carman" scan tools range made by
> > > Nextech. The Carman A200( now discontinued) , the carman scan lite and
> > > the Carman VG. The scantools also have to have the september 2007
> > > software update to get the best results as well. The carman scan lite
> > > is £1500 ($3000) retail.
> > >
> > > I own a Carman scan lite, and the scan tool Is "brilliant", as it
> > > leaves no stone unturned, you can get all the information from the
> > > car that you need on any aspect.
> > >
> > > All 20 of Prs of modules in the Hybrid battery are shown including
> > > voltages, Ohms, temp of each Pr. Also the overall max and min
> > > voltages and temperatures of the monitoring system and exact % of
> > > overall charge as well as information on every sensor on the whole
> > > car.
> > > it will give you all the trouble codes on each of the ECU's and
> > > enable you to reset them as well.
> > >
> > > The only down side to the Carman scan tools are that they do not "
> > > flash" the ECU's, that is to say that, as of yet, the software dose
> > > not turn the " balance charge request" from "OFF" to "ON" and back
> > > again, even though you can see it on the scan.
> > >
> > > One of the problems with these cars is that the cells in the Hybrid
> > > battery are an early type of "high capacity" NM-Hi, and over time
> > > they may suffer from the " battery memory affect", problem similar
> > > to NI-CAD cells, and they discharge more rapidly if left unused for
> > > any length of time as well. Toyota thought to overcome this problem
> > > by using their scantool to do the "balance charge request"
> > > manouver ,by using the cars own charging system,( a full
> > > overall/across the board 110% charge) to rejuvenate the whole Battery
> > > in one go, if this failed they would fit a free RE-CON battery
> > > instead, all though this was rare. So sadly, we "outside of Japan"
> > > owners can only strip the Hybrid Battery down ( be careful they are
> > > 315 DC volts when fully charged, from first to last terminal,
> > > according to my carman scantool info, electricians tools and gloves
> > > required). You then have to rejuvenate each module, one at a time,
> > > replacing any failed ones, and finally rebuild the battery again
> > > using as evenly as balanced pairs as you can. The Carman scan lite
> > > can help you monitor this Process but " If only" it cannot do the
> > > balance charge manouver as of yet as I have said. Some cars go on and
> > > on, without problems ( 100,000 miles +) with the battery, some have
> > > stripped the battery down and replaced a " too good" a module, to
> > > achieve a balance. So until hopefully, Carman sortout a "balance
> > > charge manouver" setting on thier scan tool, in one of their future
> > > software updates, we will still have to do this by hand. Other wise
> > > the carman scan tools covers everything else and is unique.
> > >
Saturday, March 7, 2009
Buying a Generation One Toyota Prius
What to look for when buying a Generation One Prius Hybrid ( 1997 - 2000 )
Model : NHW10
Dimensions : 4305L 1595W 1465H
Year Manufactured : 1997 - 2000
Petrol Engine : 33Kw, 1500cc
Electric Motor : 30Kw, 225 Nm torque
Max RPM : 4000, ( 0 - 100 ) 14.5 Secs
Battery : 288 volts, 57 Kg
Fuel Economy : 20 Km/L or 5L/100Kms
For those who don't know anything about and have never driven a hybrid - BEWARE. You can easily end up buying a lemon. Buy from a reputed dealer and one who knows and can support this new technology.
Look for the following
1) Vehicle must have a good reconditioned battery and a Power Jockey Installed.
Hybrid batteries last between 7 - 10 years. By now if the battery has not been reconditioned and a Power Jockey installed, the battery will soon fail and the car will be inoperable.
2) Check to ensure that the vehicle is fully maintained and serviced.
Spark Plugs : 20,000 Kms if Irridium 100,000 Kms
MAF Sensor : 80,000 Kms
Oxygen Sensors : 120,000 Kms
Service parts wear out and have to be replaced for the vehicle to operate efficiently.
If possible a scan should be done to ensure that the sensors are working correctly.
If you take care to inquire about these two aspect of the vehicle, you can be assured that the vehicle will work for many years. The Battery Clinic assures us that the battery pack can last the life of the vehicle with the occasional battery repair and cell replacement every 2 to 3 years costing about $400.
The Petrol engine is tough and very reliable. It should be able to clock up 500,000 Kms and still show little wear and tear. For one the engine does not work all the time and it red lines at 4000 RPM compared to a normal petrol engine at 8000 - 12,000 RPM. Wear and tear compared to a standard vehicle is less than half.
In New Zealand a fully reconditioned and Power Jockey equipped Generation One Prius sells for more than $5000. These vehicles are sought after because they still have a fuel economy of 20 Kms/litre.
The Electric motor will easily last the life of the vehicle. In 6 years of working with these vehicles I have not seen any motor fail.
Spare parts are available from wreckers and are well priced. Don't fall for those astronomical prices quoted for new parts by Toyota dealers. They are priced not to sell.
Model : NHW10
Dimensions : 4305L 1595W 1465H
Year Manufactured : 1997 - 2000
Petrol Engine : 33Kw, 1500cc
Electric Motor : 30Kw, 225 Nm torque
Max RPM : 4000, ( 0 - 100 ) 14.5 Secs
Battery : 288 volts, 57 Kg
Fuel Economy : 20 Km/L or 5L/100Kms
For those who don't know anything about and have never driven a hybrid - BEWARE. You can easily end up buying a lemon. Buy from a reputed dealer and one who knows and can support this new technology.
Look for the following
1) Vehicle must have a good reconditioned battery and a Power Jockey Installed.
Hybrid batteries last between 7 - 10 years. By now if the battery has not been reconditioned and a Power Jockey installed, the battery will soon fail and the car will be inoperable.
2) Check to ensure that the vehicle is fully maintained and serviced.
Spark Plugs : 20,000 Kms if Irridium 100,000 Kms
MAF Sensor : 80,000 Kms
Oxygen Sensors : 120,000 Kms
Service parts wear out and have to be replaced for the vehicle to operate efficiently.
If possible a scan should be done to ensure that the sensors are working correctly.
If you take care to inquire about these two aspect of the vehicle, you can be assured that the vehicle will work for many years. The Battery Clinic assures us that the battery pack can last the life of the vehicle with the occasional battery repair and cell replacement every 2 to 3 years costing about $400.
The Petrol engine is tough and very reliable. It should be able to clock up 500,000 Kms and still show little wear and tear. For one the engine does not work all the time and it red lines at 4000 RPM compared to a normal petrol engine at 8000 - 12,000 RPM. Wear and tear compared to a standard vehicle is less than half.
In New Zealand a fully reconditioned and Power Jockey equipped Generation One Prius sells for more than $5000. These vehicles are sought after because they still have a fuel economy of 20 Kms/litre.
The Electric motor will easily last the life of the vehicle. In 6 years of working with these vehicles I have not seen any motor fail.
Spare parts are available from wreckers and are well priced. Don't fall for those astronomical prices quoted for new parts by Toyota dealers. They are priced not to sell.
Great opportunity to own a hybrid vehicle
One fact that goes unnoticed is that the Toyota Hybrid not only saves money on fuel but also cost less to maintain. The weakness is the HV battery.
The HV battery In the Toyota Hybrid was expected to last between 8 to 10 years. The HV battery in the series 1 hybrid manufactured between 1998 to 2000 are failing or have failed. The problem is that a replacement battery cost more than the car is worth.
The Battery Clinic is the only company that specialize in restoring and reconditioning these HV batteries and give them a new lease of life. We charge a fix fee of $1500 for this service.
Knowledge is power and we have had a few people bring in vehicles that they have bought for $2500 - $3000. We recondition the battery and they get a very good cheap vehicle for their commute.
This car still drives like new - very smooth and still gives the good fuel economy. At $5000 and the likelihood that the battery will last for another 5 years your cost of vehicle ownership is as low as it gets.
Our company owns 3 series hybrids for 3 years now and the only maintenance cost are the tyres, and oil. Because of regen from braking, brake pads do not wear out as fast.
The HV battery In the Toyota Hybrid was expected to last between 8 to 10 years. The HV battery in the series 1 hybrid manufactured between 1998 to 2000 are failing or have failed. The problem is that a replacement battery cost more than the car is worth.
The Battery Clinic is the only company that specialize in restoring and reconditioning these HV batteries and give them a new lease of life. We charge a fix fee of $1500 for this service.
Knowledge is power and we have had a few people bring in vehicles that they have bought for $2500 - $3000. We recondition the battery and they get a very good cheap vehicle for their commute.
This car still drives like new - very smooth and still gives the good fuel economy. At $5000 and the likelihood that the battery will last for another 5 years your cost of vehicle ownership is as low as it gets.
Our company owns 3 series hybrids for 3 years now and the only maintenance cost are the tyres, and oil. Because of regen from braking, brake pads do not wear out as fast.
Thursday, March 5, 2009
Hey Bro - It could be the 12 volt battery not the HV
Before you blame the HV battery in your hybrid vehicle, check out the 12 volt battery.
1) The dashboard lights up, the gear shift box shows, but when you turn the ignition key nothing happens. Sometimes you will see the dash dim and nothing happens.
2) The car starts but idiot light such as power steering etc shows but they still work and the vehicle seems to be working eratically.
Unlike normal petrol vehicles the 12 volt battery in the Toyota Prius Hybrid is not used to start the petrol engine. The problem here is that the 12 volt battery does not have enough charge to power the computers. Check the voltage of the 12 volt battery. It should be at least 12.5 volts.
If the battery is weak change it and presto - you are away again. This advise will probably save you some money as the local mechanic who may not know too much could charge you many hours to discover this problem or to not discover this problem!
1) The dashboard lights up, the gear shift box shows, but when you turn the ignition key nothing happens. Sometimes you will see the dash dim and nothing happens.
2) The car starts but idiot light such as power steering etc shows but they still work and the vehicle seems to be working eratically.
Unlike normal petrol vehicles the 12 volt battery in the Toyota Prius Hybrid is not used to start the petrol engine. The problem here is that the 12 volt battery does not have enough charge to power the computers. Check the voltage of the 12 volt battery. It should be at least 12.5 volts.
If the battery is weak change it and presto - you are away again. This advise will probably save you some money as the local mechanic who may not know too much could charge you many hours to discover this problem or to not discover this problem!
Subscribe to:
Posts (Atom)
